...h varying degrees of experience and ask them to participate in a blindfold test of five 9' - 4 wt. rods of different brands. All rods will be cast with 30' of the same line. However, we ac...
Hi.
Usually you can tell the application of Rods,by the markings above the Butt section,ie the Maker,the material it's made from,the model # the action,Line & Lure weight it is best suited f...
...ry to be helpful.
I checked your site,your rod carrier,looks OK,works fine,however be careful off your rods hitting obsticles,etc,especially when there is a breeze around.
Also make sure you don...
Hi.
You'll find all Telescopic rods will fit into a 40 inch suitcase,as my Sage Custom Z Axis 9 Foot 4 piece Fly Rod in a Tube only measures not quite 30 inches,& another 5 piece Telescopic ...
I started building my own rods a few years ago. I would come home from a fishing trip and catch myself thinking about what my equipment didn't do well. Now that I build my own rods I think it is...
Hi SAGA Welcome.
Shakespeare Wonder Rods have been around for a long time,Google shakespeare wonderrods,& you will see one from 1920.
With the Collett or Chucks you require,I once had the same p...
...a WF7F on your rod so it will perform properly.
Your fiberglass rod is softer than the new graphites rods so it will be fine for trout to get you started into the sport.
Later on you could buy y...
...ark) and we'd like to catch a few dinners along the way.
We have (and have used) packable spinner rods and reals, but don't have (don't mean to buy for this trip) fly fishing equipment...
Hi
Does anyone here have one of these rods?
Any good?
...im you have to disasemble,clean them,remove the old grease & regrease them.
I just usually wipe my Rods ,store them in the Rod Socks & original tubes.
You can carry your small gear in a Tack...
I just got one of these rods from someone I know. I believe mine is form 1957< and it is Gold plated. It also has the plastic on it, and as I can see it has never been used
Hi.
We all at some time have cast heavy Lures on light Rods,I remember two friends & I casting Baltic Minnows & Baltic Flashes whilst Fishing for Trout in a local Lake,which weighed about 5/8...
im interested. do you still have the last 2 rods. my email is iluvmybigtoys@aol.com and my ell is 3479967107
does anyone know any thing about the 725 johnson fishing rods.maybe when it was made.
...your Reel,it said 225yrds 16lb line,15.9ozs,5.2:1 Ratio & 34 inches/Rev.
Also Ugly Stiks are beaut Rods,I have two of my own which I haven't used for 10 years or so,I went to The Ugly Stik w...
Looking for advice or pictures of vintage rods that I can match to my pfleuger akron reel made around 1953
Can anyone give me a review on the lighter weight 2010 Snowbee Prestige rods?
... made as I have seen reports they are made in Korea and not England. Any reviews of the Zane reels and rods?...
Has anyone had the time to form an opinion on the new Lucky Craft ESG2 rods?
Hi.
I have seen a review on Echo Rods which read OK,I don't think you would go wrong buying one,however I'm still trying to find the article for you,.
I am going to Alaska next month and needed a recommendation on which are the best10 wt. Fly rods and reel for salmon fishing
Those rods were discussed here on other threads. Check the related posts list at the bottom of this page.
catfishroy, I have never heard of Pan Fish fly rods. I am not situated in the U.S. though. Who's the manufacturer?
Next I am getting ready to properly start makin my anxiously own fly rods, & looking to save a little money on eqiupment by making things my self. Despite that does anyone have or know of some w...
Hi.
There is quite a bit of info on St Croix Rods on the site,check out the Forums & related Posts Sections.
...es work?
Heavy lbs test with a smaller diameter, a little more expensive to buy but less than separate rods & reels....
I have been using G Blank rods for the last two years. They are very well made and you have a wide choice of actions. They are so very light. I use them for every type of lures up to a 7'10"...
Hardy reels
by Hardy zane rods are made in Korea.
Hello Ghostfisher,
I have to confirm, that both of my Zane rods #10 & #12 having al little round sticker under the fightinggrip that says, Made in Korea
Grtz,
Craig
...isherman over a period of a couple years that i have ever seen. he has also built a few beautiful cane rods. it is a mistake to categorize folks by religion, as i am certain you understand....
Hi.
Check out the Forums & the Related Posts where there is some info on Fenwick Rods.
I think Fenwick put out certain Models with different Thread Wrappings.
The Content on this site is provided for general information purposes only. Your use of the Content, or any part thereof, is made solely at Your own risk and responsibility. By entering this site you declare you read and agreed to its
Terms, Rules & Privacy.
Copyright © 2006 - 2010 Fishing Talks